Kitchen fitters in Great Dunmow

How a Great Dunmow kitchen install runs

We strip out and clear the room on day one, then first fix moves the plumbing, waste, gas and sockets to where the new plan needs them rather than where the old kitchen happened to leave them. Floor goes down before the units so appliances can come out in future without lifting a worktop. Units are levelled to a laser line, worktops templated, then second fix, splashbacks, silicone and a snagging list we work through with you.

Levels, scribes and the things you only notice later

Very few Great Dunmow walls are square. Base units are set to a laser datum and packed off the floor, wall cabinets hung on a continuous rail, and end panels scribed to the wall rather than filled with sealant. Doors and drawers are adjusted twice — once on fitting and once at handover, after the units have settled.

Worktops: laminate, solid oak or stone

Laminate is cut and mason-mitred on site with the joints bolted and sealed properly. Solid oak is acclimatised in the room first, oiled top, bottom and edges, and fixed with slotted brackets so it can move. Quartz and granite are templated after the units are levelled and installed by the stone team, with cut-outs radiused so the corner never cracks.

Plumbing, electrics and gas under one roof

Rewiring for an induction hob, adding sockets, moving a boiler flue, plumbing a dishwasher and running a new waste are all handled by our own people, with a Part P certificate on completion and Gas Safe engineers where gas is involved. That is what keeps a kitchen on schedule.

Supply-only or supply-and-fit in Great Dunmow

Plenty of Great Dunmow customers buy their own kitchen from Howdens, DIY Kitchens, Wren or B&Q and want a proper fitter. We are happy with that and will check the plan and the order list before you press buy. Or we supply the whole kitchen at trade rates and one company carries the responsibility.

New-build estates on the edge of town

The developer kitchens on the newer Great Dunmow estates are usually sound carcasses with thin doors and a laminate top. Plenty of our CM6 work is a partial upgrade: new doors, new worktop, a proper island and better lighting, at a third of the cost of a full replacement.

Period cottages and the level problem

Around the old town and out towards Felsted the floors move 30mm across a room. Base units get packed and laser-levelled, plinths are scribed to the floor rather than cut straight, and worktop joints are set where the run is truest.

Farmhouse kitchens and range cookers

A range in a CM6 farmhouse needs a genuine plan: the right supply, a proper extraction route through a thick wall, heat-resistant sides and a chimney recess built out square. We handle the builder's work and the fit together so the cooker is not left waiting on somebody else.

How much does a kitchen fitter cost in Great Dunmow?

Fit-only for a typical 8 to 12 unit Great Dunmow kitchen runs £3,600 to £5,200 including first and second fix. Supply and fit for a mid-range kitchen with appliances and worktops is usually £9,000 to £16,000. Everything is itemised in writing.

How long will I be without a kitchen?

Seven to fourteen working days. We get the sink and a worktop run usable as early as we can, and if the job includes structural work we will tell you honestly which days will be dusty.

Can you fit a kitchen I have already bought?

Yes — Howdens, DIY Kitchens, Wren, IKEA, B&Q, trade or online. Send us the plan and the order list before you buy and we will check the sizes, fillers and appliance clearances first.

Do you do the electrics and plumbing too?

Yes, in-house, with a Part P certificate for the electrical work. Gas appliances are connected by a Gas Safe engineer, and unvented cylinder work by the relevant registered engineer.

Can you take a wall out to open the kitchen up?

Regularly. We arrange a structural engineer's calculation, install the steel, handle building control notification and make good — priced as one job so nobody is passing the buck.

Do you fit quartz or granite worktops?

Yes. Units are installed and levelled first, then the worktop is templated and fitted by the stone team a few days later, which is exactly how it should be sequenced.

Is there a travel charge to Great Dunmow?

No. CM6 is inside our normal working radius; the job is simply booked as a continuous run of days.

Can you replace just the doors and worktops?

Yes. If the carcasses are square and sound, replacement doors, a new worktop and new handles will transform a Great Dunmow kitchen for a fraction of a full refit — we will tell you honestly whether yours is worth keeping.